Acellular Extrinsic Fiber Cementum Is Invariably Present in the Superficial Layer of Apical Cementum in Mouse Molar.

The cementum is a highly mineralized tissue that covers the tooth root. The regional differences among the types of cementum, especially in the extrinsic fibers that contribute to tooth support, remain controversial. Therefore, this study used second harmonic generation imaging in conjunction with automated collagen extraction and image analysis algorithms to facilitate the quantitative examination of the fiber characteristics and the changes occurring in these fibers over time. Acellular extrinsic fiber cementum (AEFC) was invariably observed in the superficial layer of the apical cementum in mouse molars, indicating that this region of the cementum plays a crucial role in supporting the tooth. The apical AEFC exhibited continuity and fiber characteristics comparable with the cervical AEFC, suggesting a common cellular origin for their formation. The cellular intrinsic fiber cementum present in the inner layer of the apical cementum showed consistent growth in the apical direction without layering. This study highlights the dynamic nature of the cementum in mouse molars and underscores the requirement for re-examining its structure and roles. The findings of the present study elucidate the morphophysiological features of cementum and have broader implications for the maintenance of periodontal tissue health.

Sweet tooth: DNA profiling of a cranium from an isolated retained root fragment.

Sampling of healthy multi-rooted teeth is recommended for the genetic identification of human skeletal remains. However, this may not always be possible, as in the reported case consisting of an isolated human cranium found in an aggregate crushing and processing plant in Piedmont, Northwest Italy. The cranium displayed significant weathering, suggesting a post-mortem interval of several years, and was edentulous with the exception of the apical root fragment of the upper left canine, consequence of an antemortem horizontal fracture. Prolonged decalcification of the root fragment followed by powder-free DNA extraction from ~10 mg of root tip tissue led to the recovery of >10 ng of high molecular weight human DNA, in comparison with ~0.01 ng of DNA per mg of bone powder obtained from the petrous portion of the temporal bone. Quantity and quality of DNA isolated from apical tooth tissue enabled multiple genotyping, including a reportable female STR profile, mitochondrial DNA analysis, and ancestry-informative insertion/deletion polymorphisms. Although the cranium remained unidentified after DNA comparisons, our findings confirm that apical tooth tissue is a promising source of DNA, easily obtained through a powder-free extraction protocol. Results also indicate that root tips should not be overlooked in challenging identification cases, even in the presence of compromised tooth specimens.

FOS Rearrangement and Expression in Cementoblastoma.

Cementoblastomas are rare odontogenic tumors developing in close proximity to the roots of teeth. Due to their striking morphologic resemblance to osteoblastomas of the peripheral skeleton, we set out to determine whether cementoblastomas harbor the same FOS rearrangements with overexpression of c-FOS as has recently been described for osteoblastomas. In total, 16 cementoblastomas were analyzed for FOS expression by immunohistochemistry and for FOS rearrangements by fluorescence in situ hybridization (FISH). We observed strong and diffuse staining of c-FOS in 71% of cementoblastomas and identified a FOS rearrangement in all cases (n=3) applicable for FISH. In the remaining cases, FISH failed due to decalcification. Cementoblastomas harbor similar FOS rearrangements and show overexpression of c-FOS like osteoblastomas, suggesting that both entities might represent parts of the spectrum of the same disease.

Dental Forensic Kit (DFK®) and Quick Extract™ FFPE DNA extraction kit, a new workflow for obtaining dental DNA for human genetic identity.

BACKGROUND: Most of the protocols described for obtaining DNA from dental tissues are methods that involve major laboratory equipment and many hours of work. They are also methodologies that almost destroy the tooth. AIM: Our aim was to develop an innovative workflow for optimizing dental DNA extraction from teeth. Our methodological proposal is a new workflow for obtaining dental DNA for human genetic identity using Dental Forensic Kit (DFK®) and Formalin-Fixed Paraffin-Embedded (FFPE™) DNA extraction kit. METHODS: Two different dental samples groups were assayed with DFK® and FFPE™. The first group corresponded to extracted teeth from living donors and the second group was considered in real conditions with challenging teeth from corpses. Genomic Dental DNA was amplified and genotyped with platforms Identifiler Plus™, Power Plex 21™ and Global Filer ™ kits. RESULTS: Our workflow was useful in obtaining dental DNA and partial and complete genetic profiles, from teeth of both study groups. DFK® kit worked in a conservative treatment of teeth generating dental tissues (pulp and cement) and FFPE™ for DNA extraction was a very cheap, quick and easy method for obtaining genomic dental DNA. CONCLUSIONS: The innovative method and the workflow proposed herein allows obtaining robust and reliable genetic profiles, from dental tissues. DFK® kit works optimizing the treatment of dental tissues and FFPE™ demonstrates a new use in forensic genetics.

Influence of different laser-assisted retrograde cavity preparation techniques on bond strength of bioceramic-based material to root dentine.

The purposes of the study were to evaluate the bond strength of bioceramic TotalFill root repair material (RRM) in retrograde cavities prepared using Er:YAG and Er,Cr:YSGG laser and steel bur, and to analyze failure modes. The root canals of 30 single-rooted teeth were endodontically treated, their root-ends were resected using a diamond bur, and the teeth were randomly divided into three groups (N = 10) according to the retrograde cavity preparation technique: (1) Er:YAG laser, (2) Er,Cr:YSGG laser, and (3) steel bur. All retrograde cavities were filled with the TotalFill RRM which was prepared according to the manufacturers' instructions. Push-out test was performed using universal testing machine, and failure mode was analyzed using a scanning electron microscope. The data were analyzed using one-way ANOVA, post hoc analysis with Bonferroni correction, and Fisher-Freeman-Halton exact test (p < 0.05). In the Er:YAG-, Er,Cr:YSGG-, and steel bur-prepared cavities, mean bond strengths (MPa) were 12.76, 8.44, and 6.01, respectively. The bond strength of the TotalFill RRM to dentin was significantly higher in the Er:YAG laser compared with the steel bur-prepared cavities (p = 0.004). The bond strength was not significantly different between the Er:YAG and Er,Cr:YSGG cavities (p = 0.074) and between the Er,Cr:YSGG and bur cavities (p = 0.648). In the cavities prepared by the Er,Cr:YSGG laser and bur, the failure mode of the TotalFill RRM was predominantly mixed, then adhesive and cohesive. In the Er:YAG laser-prepared cavities, the most common failure mode was adhesive, followed by mixed type and no cohesive failure. The bond strength of the TotalFill RRM to dentin was highest in the group of retrograde cavities prepared by the Er:YAG laser.

Biological effects on tooth root surface topographies induced by various mechanical treatments.

The cleaning and physicochemical properties on tooth root biointerfaces are pivotal for periodontal healing. Herein, this work investigated the impact of multi-treatment on the physicochemical features of tooth root surfaces and the responsive behavior of human gingival fibroblasts (hGFs). It was found that the combination of various mechanical treatments significantly affects the topographical pattern and size as well as wettability on tooth root surfaces. Furthermore, biological experiments revealed that hGF behaviors (i.e., cell adhesion, shape, spreading, arrangement, and viability) were regulated by the topography and wettability of tooth root surfaces. Also, there was no significant difference in the protein expression of NLRP3 inflammasome and IL-1ß in hGFs among tooth root surfaces under various treatments. This study provides new insights to efficiently remove the dental calculus and to understand the interaction between the tooth root interface and cell, which could guide the clinical operation and thereby is more conducive to periodontal recovery.

Factors affecting dental DNA in various real post-mortem conditions.

Post-mortem DNA degradation is still the real challenge of DNA-based identification in forensic practise. It is a complicated multifactorial process occurring as a result of the combination of several different environmental effects along with the crucial effect of the elapsed post-mortem interval (PMI). The main purpose of the present study is to evaluate the effect of ante- and post-mortem factors on dental DNA in real forensic cases. Ninety-five teeth extracted from 39 corpses, whose bodies were subject to 6 different post-mortem conditions, were used to evaluate dental DNA amount. In total, 179 DNA extracts isolated from the root of the teeth were examined after removing the crown and sectioning each root into apical and cervical portions. DNA concentration was measured using real-time polymerase chain reaction DNA quantitation kit (PowerQuant™ System/Promega). Our results indicate that the post-mortem interval (PMI) is the most important influential factor on dental DNA quantification (p < 0.001). However, in the actual data set, it was confounded with several ante- and post-mortem factors, rendering its actual net effect difficult. The time period of the first 10 days after death yielded the best DNA results from all analysed dental samples. Afterwards, a dramatic decrease in dental DNA was observed in the following time period. Teeth extracted from burnt and fresh corpses yielded the highest amount of DNA, while skeletonized exhumed corpses resulted in the lowest DNA amount. Indeed, dry and indoor conditions demonstrated better results than those in water, outdoors, or buried in the ground. On the other hand, ante-mortem factors including sex, age, tooth type, and tooth root portions did not reveal significant effect on dental DNA yield. We suggest that ante-mortem factors are considerably more subjected to individual variations. Post-mortem factors including PMI, post-mortem conditions, and the relevant surrounding environments have substantial influence on the dental DNA amount yielded.

Dental iron precipitates in patients with Type 2 diabetes.

Diabetes mellitus (DM) is a frequent worldwide disease. There are currently more than 46 million people who suffer this disease in North America and the Caribbean. The objective of this study was to determine if there is an association between DM and the presence of iron precipitates (Fe2+) in dental structure. The third molar was extracted for reasons that merit extraction from 40 individuals with and without DM to analyze dentin tissue. Horizontal and longitudinal slices of tooth samples were made and later stained with 10% potassium cyanoferrate. The samples were observed by optical microscope to identify basophilic elements. A nonparametric Spearman correlation was performed to find an association between the quantitative (gender, group, and dentinal tissue) and qualitative variables (gender). The Mann-Whitney U test was used to find differences in the means of the nonparametric variables in two different groups in relation to the P value (<0.05). Iron elements were found in the predentin and circumpulpal dentin areas, and the results obtained showed a statistically significant difference between dentin tissue from patients with diabetes and those without. Individuals with Type 2 DM are prone to present iron precipitates in predentin and circumpulpal dentin tissue. Few iron elements were found in dental organs of individuals without DM.

Effect of radiotherapy on the chemical composition of root dentin.

BACKGROUND: The radiotherapy can directly affect the bond strength of the adhesive materials, interfering in the prognosis of restorative treatments, which may be caused by chemical changes in dentin structure. METHODS: Twenty inferior homologues premolars were distributed in 2 groups (in vitro study) (n = 10): nonirradiated and irradiated. The specimens were submitted to the analysis of phosphate (ν1 PO43- ;ν2 PO43- ;ν4 PO43- ), carbonate (ν3 CO32- ), amide I, CH2 , amide III, and amide I/III ratio by confocal Raman spectroscopy. Data were submitted to statistical analysis (T test, P < .05). RESULTS: In intracanal dentin, the irradiated group had lower ν4 PO43- values (1.23 ± 0.06) compared to nonirradiated group (1.40 ± 0.18) (P < .05), with no difference for ν1 PO43- and ν2 PO43 peaks (P > .05). The irradiated (1.56 ± 0.06) had lower carbonate, amide III (1.05 ± 0.19), and amide I/III ratio values (0.19 ± 0.06) compared to nonirradiated group (1.42 ± 0.10, 1.28 ± 0.24, and 0.31 ± 0.10, respectively) (P < .05). For medium dentin irradiated group (1.30 ± 0.12) had lower phosphate values compared to nonirradiated group (1.48 ± 0.22) (P < .05). In cementum, there was no statistical difference between the groups. CONCLUSION: The radiotherapy was able to cause changes in ν4 PO43- , carbonate, and amide III peaks of root dentin.

Evaluation of chemical and morphological changes in radicular dentin after different final surface treatments.

The aim of this study was to evaluate the chemical and morphological effects of different lasers as a final surface treatment for endodontic therapy through energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) respectively. Twenty-five maxillary canines were selected and instrumented with K3 system. Roots were randomly distributed into five groups (n = 5) according to the surface treatment: GI (distilled water), GII (NaOCl + EDTA), GIII (NaOCl + EDTA + 980 nm diode laser), GIV (NaOCl + EDTA+ 1,064 nm Nd:YAG laser), and GV (NaOCl + EDTA+ 2,780 nm Er, Cr:YSGG laser). Lasers were applied for 20 s and samples were bisected, exposing the treated surface and then subjected to elements quantification by EDS and morphological evaluation by scanning electron microscope (SEM). EDS data were submitted to ANOVA-two way, and SEM scores were submitted to two-way Kruskal-Wallis and Dunn's tests. The EDS analysis showed no difference for the chemical elements and Ca/P ratio between groups (p > .05). Statistical analysis showed more intense results for GV and less intense results for GI (p < .05). The GIII showed an amorphous organic matrix surface, while GV provided greater removal of intertubular dentin forming craters, and GIV promoted dentin fusion. The EDS method used in this study was not able to verify any chemical changes in root canal dentin; Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser were capable of modifying the dentin morphology, correlating characteristics features for each one, which are essential clinical knowledge to establish the correct indication for each case. RESEARCH HIGHLIGHTS: EDS was not able to verify any chemical changes in root canal dentin after 980 nm diode, Nd:YAG and Er;Cr:YSGG laser treatments Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser modified dentin morphology, correlating characteristics features for each one.

Use of XRD and SEM/EDX to predict age and sex from fire-affected dental remains.

In fire scenarios, the application and accuracy of traditional odontological methods are often limited. Crystalline studies and elemental profiling have been evaluated for their applicability in determining biological profiles (age and sex) from human dentition, particularly fire- and heat-affected dental remains. Thirty-seven teeth were paired according to tooth type and donor age/sex for the analysis of crown and root surfaces pre- and post-incineration using X-ray diffraction (XRD) and scanning electron microscopy (SEM/EDX). In unburned crowns, carbon (C) content showed a positive correlation with age, whereas phosphorus (P) and calcium (Ca) contents showed a negative correlation with age. In unburned roots, C, P and Ca contents also showed significant changes that were opposite of those observed in the crowns. In relation to sex, females exhibited a higher C ratio than males, whereas males showed significantly higher levels of oxygen (O), P and Ca in unburned roots. Incineration resulted in an increase in the crystallite size that correlated with increasing temperature. No differences in hydroxyapatite (HA) crystallite size were found between age groups; however, unburned teeth from females exhibited a larger crystallite size than did those from males. The challenges of using XRD with a 3D sample were overcome to allow analysis of whole teeth in a nondestructive manner. Further studies may be useful in helping predict the temperature of a fire.

Circumferential root strains generated during lateral compaction with stainless steel vs. nickel-titanium finger spreaders.

The circumferential strains created in the radicular dentin by nickel-titanium (NiTi) and stainless steel (SS) finger spreaders (FSs) during a simulated clinical procedure of lateral compaction were compared after minimal (size 50) and extensive (size 100) canal preparations. Nineteen maxillary central incisors underwent minimal preparation, while 10 underwent an extra phase of extensive preparation. Four miniature strain gauges were bonded circumferentially in the apical third of the root (buccal, lingual, mesial, and distal). Lateral compaction was performed using either NiTi-FSs or SS-FSs. Force and strains were continuously recorded. The maximal strains (with and without normalization according to force) were recorded. The SS-FSs generated higher maximal strains normalized according to force compared with the NiTi-FSs. The maximal normalized strains were higher by 37%-43% for the mesial and distal aspects and by 6%-14% for the buccal and lingual aspects after the minimal preparation and by 24%-28% for the mesial and distal aspects and by 19%-20% for the buccal and lingual aspects after extensive preparation. The maximal normalized strains increased by 30%-70% from minimal to extensive preparations, with two teeth exhibiting vertical root fracture while compaction with SS-FS. The NiTi-FSs induce less strain in root dentin than the SS-FSs and thus may contribute less to the risk of vertical root fracture.

Micro-computed tomography assessment of root dentin around fluoride-releasing restorations after demineralization/remineralization.

Using micro-computed tomography (micro-CT), this study assessed the inhibitory effect of three different types of restorations on root-caries formation under a cariogenic challenge. Bovine-root dentin blocks with a cylindrical cavity were divided into three restoration groups: a fluoride-free self-etch adhesive and a resin composite (SE-ES); a self-etch adhesive and a resin composite with multi-ion release (FL-BF); and a glass ionomer cement (Fuji-VII). After the restorative procedures, the specimens were stored in artificial saliva for 1 d, then subjected to a demineralization solution for 4 d and a remineralization solution for 28 d. Mineral density and mean mineral loss of dentin around the restorations were measured using micro-CT. The mean mineral loss values of dentin around the restorations were highest among SE-ES restorations and lowest among Fuji-VII restorations. Fuji-VII showed the highest mineral density and the lowest mineral loss after 28 d of remineralization. The observations made by scanning electron microscopy demonstrated that Fuji-VII created the smallest outer lesion followed by FL-BF and SE-ES. Fuji-VII has a larger inhibitory effect on root caries around the restorations and enhances remineralization more effectively than either FL-BF or SE-ES. Multi-ion and fluoride release from the restorative materials may be beneficial for inhibition of root-dentin caries around the restorations.

Assessing periapical dental radiographs as a screening parameter for early indications of osteoporosis in postmenopausal periodontal patients and root surface evaluation using spectrochemical analysis.

OBJECTIVES: To assess the usefulness of periapical dental radiograph as a screening tool aimed at early signs of osteoporosis in postmenopausal periodontal patients  and root surface evaluation using spectrochemical analysis. Methods: This study was conducted at the Department of Periodontics, Riyadh Elm University, Riyadh, Saudi Arabia, for 12 months between December 2016 and November 2017. Two groups consisted healthy postmenopausal women having chronic periodontitis and postmenopausal women having chronic periodontitis with osteoporosis. Osteoporosis were evaluated for plaque index (PI); gingival index (GI); clinical attachment level (CAL); probing pocket depth (PPD), and bone mineral density (BMD). A standardized digital dental periapical radiographs were taken for every patient. The spectrochemical analysis was carried out using the self-assembled Laser-Induced Breakdown Spectroscopy (LIBS) system used for qualitative and quantitative analysis of Calcium (Ca), Potassium (K), Phosphorus (P), Fluoride (F), and Magnesium (Mg). Results: There was no statistically significant difference between both groups for GI and PI. Similarly PPD and CAL were showing the difference but statistically, significant difference was only for CAL. Value of distance starting from cement enamel junction to the alveolar crest (CEJ-AC) and BMD were having a statistically significant variance between both groups. The differences between osteoporotic and control group were statistically significant regarding Ca with the mean higher in the control group. Furthermore, the variances between the groups in both K and Mg were statistically significant with higher mean in the osteoporotic group (p less than 0.05).  Conclusion: The clinical, radiographic, and experimental findings of this study indicated that osteoporosis has a direct effect on the progression rate of periodontal tissue destruction and dental radiographic can be suggested as a screening tool for an early sign of osteoporosis.

Aspartic acid racemization of root dentin used for dental age estimation in a Polish population sample.

Precise age determination of unidentified bodies and human remains is one of the essential tasks of forensic science. The aim of this study was to assess the applicability of using the enantiomeric composition of aspartic acid racemization in root and crown dentin for dental age estimation using a Polish population sample. Coronal and root dentin from four teeth groups from the mandible were studied using gas chromatography with mass spectrometry. The results demonstrated a very high correlation between the chronological age and enantiomeric composition in both of the dentin samples. Individual linear equations of root dentin with correlation coefficients between 0.96 and 0.98 and a standard estimation error of ±2.95-4.84 years validated the application of aspartic acid racemization as a significant practical contribution to everyday forensic medical practice. Discrepancies in methodological aspects and modifications that simplify the protocol are presented.

Influence of ethanol on dentin roughness, surface free energy, and interaction between AH Plus and root dentin.

This study aimed to evaluate the influence of different ethanol concentrations on dentin roughness, surface free energy, and contact angle between AH Plus and the root canal dentin. One hundred human maxillary anterior teeth were split longitudinally and 200 dentin specimens were polished to make the surface flatter and smoother. An acrylic bar was positioned between two dentin specimens and impression material was added to create a block, simulating an instrumented root canal space. Specimens were removed from the mold and cleaned in an ultrasonic bath for 10 min. Thereafter, dentin specimens were divided into four groups (n = 50) according to the drying methods used: a) wet: vacuum only, b) paper points: vacuum + absorbent paper points, c) 70% alcohol: 70% alcohol (1 min) + vacuum + absorbent paper points, and d) 100% alcohol: 100% alcohol (1 min) + vacuum + absorbent paper points. A rugosimeter and a goniometer were used to verify the roughness (Ra) and to measure the surface free energy and the contact angle between the AH Plus sealer and the root canal dentin. ANOVA and Tukey tests (α = 0.05) were used for statistical analysis. The 70% and 100% ethanol groups showed significantly decreased roughness as well as increased surface free energy in the root canal dentin when compared to the wet and paper point groups. In addition, ethanol significantly reduced the contact angle between the AH Plus sealer and the root canal dentin. Ethanol solutions (70% and 100%) provide better wettability of AH Plus sealer on dentin surfaces.

Variation on Molecular Structure, Crystallinity, and Optical Properties of Dentin Due to Nd:YAG Laser and Fluoride Aimed at Tooth Erosion Prevention.

This in vitro study evaluated the compositional, crystalline, and morphological effects promoted by Nd:YAG laser on root dentin, and verified the effects of laser and topical acidulated phosphate fluoride application (APF-gel) on dentin erosion. 180 bovine dentin slabs were randomized into 4 groups (n = 45): G1-untreated, G2-APF-gel (1.23% F-, 4 min), G3-Nd:YAG (1064 nm, 84.9 J/cm², 10 Hz), and G4-APF-gel application followed by Nd:YAG laser irradiation. The compositional, crystalline, and morphological effects promoted by treatments were investigated on five samples of each experimental group. The other samples were submitted to a 5-day, 10-day, or 15-day erosive and abrasive demineralization and remineralization cycling in order to create erosion lesions. The area and depth of lesions, as well as the optical attenuation coefficient, were assessed, and all data were statistically analysed (p < 0.05). Nd:YAG laser promoted the reduction of carbonate, the formation of tetracalcium phosphate, as well as the melting and recrystallization of the dentin surface. Laser significantly decreased the area and depth of erosion lesions and altered the optical attenuation coefficient when compared to untreated and APF-gel groups, but the association of APF-gel and laser did not promote an additional effect. Nd:YAG laser irradiation can be a promissory treatment to prevent dentin erosion and the abrasion process.

In vitro bond strength of an epoxy resin-based root canal sealer to root dentin irradiated with high-power lasers and adhesive interface analyses.

The aim of this study was to evaluate in vitro the influence of high-power lasers (Nd:YAG and diode 980 nm) associated with mineral coal as fotopotencializer on bond strength of an epoxy resin-based root canal sealer to root dentin, using the pushout test, and on the dentin/filling material interface, using confocal laser microscopy. For this purposes, 50 canines were instrumented with Mtwo rotary system up to #50.04 instrument and randomly assigned to five groups (n = 10): group I-control EDTAC; group II-EDTAC and Nd:YAG laser; group III-EDTAC and diode laser 980 nm; group IV-EDTAC, Nd:YAG laser and mineral coal 5 g/100 mL; and group V-EDTAC, diode laser 980 nm and mineral coal 5 g/100 mL. All data were analyzed by ANOVA (at 5% significance level) following the Kruskal-Wallis, Dunn and Tukey tests. The group I increased more bond strength of the sealer to root dentin that treated with only EDTAC 17% (17.21 ± 21.75 MPa), similar to the group II (12.21 ± 18.20 MPa) and group IV (14.92 ± 28.06 MPa), both treated with Nd:YAG laser, with the exception of group IV, which was added to mineral coal. The group V (8.75 ± 13.42 MPa) had similar results to the groups II and IV, but the same similarity were found when compared with group III (7.11 + 11.28 MPa), with lower results. Regarding the root thirds, the apical third (23.27 ± 29.21 MPa) presented a statistically higher value on bond strength than the cervical third (5.92 ± 5.33 MPa) and middle third (6.93 ± 7, 11 MPa) (p > 0.05). Group II (86.27 µm) showed the highest tags penetration values, with a statistically difference to the group III (51.57 µm), IV (36.77 µm) and V (32.37 µm) (p < 0.05). Group I (71.63 µm) was statistically similar to groups II and III (p > 0.05). Group IV had the lowest values and was statistically similarity to groups III and V (p > 0.05). It was concluded that the treatment with Nd:YAG laser provides better results than the diode 980 nm laser, except when was added mineral coal. The control and diode 980 nm laser groups presented less adhesive failures and more mists failures than the other groups. Both lasers did not interfere negatively compared to the control group.

Surface roughness and bacterial adhesion on root dentin treated with diode laser and conventional desensitizing agents.

The treatments for dentin hypersensitivity (DH) may change the surface roughness of the root dentin, which can lead to biofilm accumulation, increasing the risk of root caries. The aim was to compare the surface roughness of root dentin after different treatments of DH and the biofilm formation on those surfaces. After initial surface roughness (Sa) assessment, 50 bovine root fragments received the following treatments (n = 10): G 1-no treatment; G2-5% sodium fluoride varnish; G3-professional application of a desensitizing dentifrice; G4-toothbrushing with a desensitizing dentifrice; and G5-diode laser application (908 nm; 1.5 W, 20 s). The Sa was reevaluated after treatments. Afterward, all samples were incubated in a suspension of Streptococcus mutans at 37 °C for 24 h. The colony-forming units (CFU) were counted using a stereoscope, and the results were expressed in CFU/mL. The one-way ANOVA and the Tukey's tests compared the roughness data and the results obtained on the bacterial adhesion test (α = 5%). G2 (2.3 ± 1.67%) showed similar Sa variation than G1 (0.25 ± 0.41%) and G5 (5.69 ± 0.99%), but different from group G3 (9.05 ± 2.39%). Group 4 showed the highest Sa variation (30.02 ± 3.83%; p < 0.05). Bacterial adhesion was higher in G4 (2208 ± 211.9), suggesting that bacterial growth is greater on rougher surfaces. The diode laser and the conventional treatments for DH may change the surface roughness of the root dentin, but only brushing with desensitizing dentifrice induced a higher bacteria accumulation on root dentin surface.

Influence of ethanol on dentin roughness, surface free energy, and interaction between AH Plus and root dentin

Abstract This study aimed to evaluate the influence of different ethanol concentrations on dentin roughness, surface free energy, and contact angle between AH Plus and the root canal dentin. One hundred human maxillary anterior teeth were split longitudinally and 200 dentin specimens were polished to make the surface flatter and smoother. An acrylic bar was positioned between two dentin specimens and impression material was added to create a block, simulating an instrumented root canal space. Specimens were removed from the mold and cleaned in an ultrasonic bath for 10 min. Thereafter, dentin specimens were divided into four groups (n = 50) according to the drying methods used: a) wet: vacuum only, b) paper points: vacuum + absorbent paper points, c) 70% alcohol: 70% alcohol (1 min) + vacuum + absorbent paper points, and d) 100% alcohol: 100% alcohol (1 min) + vacuum + absorbent paper points. A rugosimeter and a goniometer were used to verify the roughness (Ra) and to measure the surface free energy and the contact angle between the AH Plus sealer and the root canal dentin. ANOVA and Tukey tests (α = 0.05) were used for statistical analysis. The 70% and 100% ethanol groups showed significantly decreased roughness as well as increased surface free energy in the root canal dentin when compared to the wet and paper point groups. In addition, ethanol significantly reduced the contact angle between the AH Plus sealer and the root canal dentin. Ethanol solutions (70% and 100%) provide better wettability of AH Plus sealer on dentin surfaces.